GTX600 Driver Windows 64bit (Variable Droplet)

Update the print driver to latest before updating the firmware.

Download and extract the folder to your desktop. This driver is compatible with Windows® 10 (64bit) and Windows® 11 (64bit). This driver requires CPU of 2.0 GHz or better and a minimum of 8 GB of RAM. A monitor display of SXGA (1280 x 1024) or higher is required.

Unplug the USB cable from GTX600 the to the PC and check to make sure there are no documents stuck in the printer queue. Next open the “GTX6-3.0.0_win” folder and double click the setup.exe file. The system will select the OS automatically. Follow the prompts on screen.

If you are running both a GTX600 and prior GT model from the same PC, you will need to upgrade to the latest firmware and driver.

You must perform the Initial Settings after head replacement. After updating the driver and firmware do the following calibrations from the maintenance menu:

• Color adjustment between two heads
• Firing adjustment
• 2 same color heads position adjustment
• Platen rolling adjustment.
• White color alignment.

New Features include:

• Variable droplet DTF support

GTX600 Driver Mac 64bit (Variable Droplet)

Update the print driver to latest before updating the firmware.

Download the “zip” file and Safari should automatically extract it, leaving you with the Brother GTX600 “pkg” installer file in your default download location, this will normally be the Downloads folder in Finder. If the “zip” file doesn’t automatically extract after downloading, locate it and then double-click on it and it will extract the “pkg” installer file. This driver works with macOS Ventura 13 (64bit) and Sonoma (64bit). The driver supports both Intel and M1 chipsets. This driver requires CPU of 2.0 GHz or better and a minimum of 8 GB of RAM. A monitor display of SXGA (1280 x 1024) or higher is required.

Unplug the USB cable from GTX600 the to the Mac and check to make sure there are no documents stuck in the printer queue. Next open the “GTX6-3.0.0_mac” folder and double click the setup.exe file.

The system will select the OS automatically. Follow the prompts on screen.

If you are running both a GTX600 and prior GT model from the same Mac, you will need to upgrade to the latest firmware and driver.

You must perform the Initial Settings after head replacement. After updating the driver and firmware do the following calibrations from the maintenance menu:

• Color adjustment between two heads
• Firing adjustment
• 2 same color heads position adjustment
• Platen rolling adjustment.
• White color alignment.

New Features include:

• Variable droplet DTF support

GTX600 Firmware

Update print driver to latest before updating the firmware.

This firmware CAN ONLY BE LOADED on a GTX600.

Download the “GTX6FIRM_03000007” file and unzip. Execute “GTX6 Firmware Update” in [Brother GTX-6 Tools] and select the unzipped Firmware Data (extension “.bwf”).

Follow the Wizard and update the GTX600 Firmware. Do not disconnect the USB or LAN cable in execution.

New Features include:

• Variable droplet DTF support

GT Printer Driver Uninstall Tool

This download includes the GT Garment Printer Uninstall Tool.zip. After unzipping the file open the GT Garment Printer Uninstall Tool folder and double click on the BrRemPnP.exe (the only icon in color) executable file to run the tool. This tool is for Windows® operating system computers only.

GTX600 Setup Manual

Quick setup installation guide for how to prep the printer for installation. Installations are carried out by certified technicians ONLY. This document shows what can be expected in regards steps performed with the printer to setup the piece of equipment to point of being ready to run firing adjustments and print.

GTX Graphics Lab 8.0 Mac

You must upgrade the print driver and Firmware to latest before installing this software. Before printing, you must also perform the Initial Settings after head replacement which includes Color adjustment between two heads, Firing adjustment, 2 same color heads position adjustment, Platen rolling adjustment and White color alignment. This software cannot be installed on a computer which has GTX Graphics Lab installed.

This application is only compatible with macOS Ventura 13 (64bit) and Sonoma (64bit).

GTX Graphics Lab 8.0 Windows

You must upgrade the print driver and Firmware to latest before installing this software. Before printing, you must also perform the Initial Settings after head replacement which includes Color adjustment between two heads, Firing adjustment, 2 same color heads position adjustment, Platen rolling adjustment and White color alignment. This software cannot be installed on a computer which has GTX Graphics Lab installed.

This application is only compatible with Windows® 10 (64bit) and Windows® 11 (64bit). This driver requires CPU of 2.0 GHz or better and a minimum of 4 GB of RAM. A monitor display of XGA (1024 x 768) or higher is required.

Optional Platens

Premade templates of the Square Coaster, Wrap Around Platen, Shoulder platens, Hat platen, Sleeve platen, and T-lock 7in1 platens that can be loaded into GTX Graphics Lab 4.2